Just finished week 1 of a 3 week stretch at [mom's hospital].
Thursday I had to go up and take a look at a particular copier because someone had reported that it was "stuck" on a print job, processing endlessly without actually printing anything and that this was tying the machine up.
Well, I took care of that issue (had to restart the copier) but before I left, I happened to notice that 3 of the 4 paper trays were showing empty, so I figured I'd fill them up.
Opened tray 1 and it's full of paper.....except it's on the WRONG SIDE.
Let me explain.....all the paper trays on this machine can accept paper up to 11 x 17 inches. Simply adjust the guides to fit. However, the paper feeds from the right side, so when using smaller sizes like 8.5x 11 it needs to be loaded on the right side of the drawer.
Some idiot had loaded it on the left.
There are several clues that this is wrong.
-2 of the 3 guides are on the right.
-The plate that lifts the paper up to the pick-up roller is on the right
-The fill line is on the right
-The machine will show that the tray is empty if you do this
-And last, but certainly not least, there's the fact that whoever did this had to move the left guide to do this, and then force the paper down.
I put the paper back where it belongs, then checked the other two drawers. Yep....all three had been moved.
I went back tot he copy center and lamented that the people in that department are fucking idiots, and it turns out that this has happened half a dozen times on the same machine in the past two weeks.
Friday it was slow so I pulled up a signage template and made some signs that said "STOP! Do not put paper here. Please load paper to the right -->"
The site manager gave his blessing on putting them in the trays on that machine, so I did.
And care to guess what I found when I put them in?
Yep....someone had moved the paper AGAIN!
Thursday I had to go up and take a look at a particular copier because someone had reported that it was "stuck" on a print job, processing endlessly without actually printing anything and that this was tying the machine up.
Well, I took care of that issue (had to restart the copier) but before I left, I happened to notice that 3 of the 4 paper trays were showing empty, so I figured I'd fill them up.
Opened tray 1 and it's full of paper.....except it's on the WRONG SIDE.
Let me explain.....all the paper trays on this machine can accept paper up to 11 x 17 inches. Simply adjust the guides to fit. However, the paper feeds from the right side, so when using smaller sizes like 8.5x 11 it needs to be loaded on the right side of the drawer.
Some idiot had loaded it on the left.
There are several clues that this is wrong.
-2 of the 3 guides are on the right.
-The plate that lifts the paper up to the pick-up roller is on the right
-The fill line is on the right
-The machine will show that the tray is empty if you do this
-And last, but certainly not least, there's the fact that whoever did this had to move the left guide to do this, and then force the paper down.
I put the paper back where it belongs, then checked the other two drawers. Yep....all three had been moved.

I went back tot he copy center and lamented that the people in that department are fucking idiots, and it turns out that this has happened half a dozen times on the same machine in the past two weeks.
Friday it was slow so I pulled up a signage template and made some signs that said "STOP! Do not put paper here. Please load paper to the right -->"
The site manager gave his blessing on putting them in the trays on that machine, so I did.

And care to guess what I found when I put them in?
Yep....someone had moved the paper AGAIN!
Comment